Good. Great. GUDE.

Expert Net Control 2111 Series

Remote Monitoring System with 4 switchable relay outputs and 12 passive signal inputs

Expert Net Control 2111 allows extensive remote controlling over TCP/IP network. The device disposes of 4 separately switchable relay outputs and 12 passive signal inputs for polling of NO/NC appliances. Each signal input consists of a 3-fold PTR terminal with ground and 12 V connector, so that cabling efforts are limited. There are two connectors for a redundant power supply by external supply units. In addition, Expert Net Control 2111-2 disposes of Power-over-Ethernet (PoE).

The remote monitoring system is equipped with good readable LED displays that provide a clear overview of sensor values, power supply and input/output status. Thanks to 4 sensor interfaces the device can be enhanced with optional available sensors to a remote monitoring system measuring environment temperature, humidity, air pressure, leakage as well as smoke. The sturdy metal case of Expert Net Control 2111 allows various mounting types.

Produktbild

Expert Net Control 2111 Series

Benefits

  • 4 separately switchable relay outputs
  • 12 passive signal inputs with 12 V
  • 2 inputs for redundant power supply
  • Power-over-Ethernet integrated (2111-2)
  • 4 sensor ports for a variety of sensor types
  • IPv6, SNMPv3, SSL, Telnet, Radius, Modbus TCP
  • Sturdy metal housing of significant manufacture

Features

  • 4 switchable, potential-free relay outputs with change-over connectors (NO and NC), high switching voltage 36 V, 3 A   
  • Switching of relay outputs dependent on sensor thresholds and inputs possible
  • Relays dispose of high contact reliability also at very small loads
  • 12 passive inputs for monitoring NO and NC devices, e.g. door contacts, smoke detectors, leakage sensors etc.
  • Each signal input includes a 12 V connector for supply of NO/NC devices
  • 4-channel watchdog for monitoring connected consumers (ICMP/TCP)
  • 4 interfaces for optional sensors for environmental monitoring (temperature, humidity and air pressure)
  • Messages by e-mail, Syslog and SNMP traps depending on threshold values of sensor metering and signal inputs
  • A clearly visible LED display for total current, IP address, sensor data and error reports
  • LED display for status of power supply and inputs/outputs
  • 2 inputs for redundant power supply (12 V DC) via 2 external power supply units (one external power supply 7903 included in delivery)
  • For Expert Net Control 2111-2 additional power supply by Power-over-Ethernet (PoE) possible
  • Sturdy metal housing allows for various types of mounting
  • Comfortable DIN rail mounting by optional Mounting Clip 0860
  • Free Android App and iPhone App allow access from anywhere
  • Low internal power consumption
  • Developed and manufactured in Germany

Network

  • Dynamic IP address allocation by DHCP or manual allocation with static IP address
  • IPv6-ready
  • Firmware update over Ethernet during operations (without reboot of device, relays states are preserved)
  • Syslog support
  • HTTP/HTTPS, E-Mail (SSL, STARTTLS)
  • SNMP Get/Traps (SNMPv1, v2c, v3)
  • TLS 1.0, 1.1, 1.2
  • IP Access Control List
  • Secure login through SSL
  • Configuration and control via Telnet
  • Radius and Modbus TCP support
  • Comfortable configuration by web browser, Windows or Linux tool
  • 10/100 Mbit/s
Switching relay outputSignal inputDual-CircuitNetwork interfaceInterface for external sensorsPower supply by Power-over-EthernetiPhone/Android App for remote access
Electrical Connections
2 sockets for external power supply units (PTR multiconnector, 2-fold)
4 switchable outputs (PTR multiconnector, 3-fold)
12 passive signal inputs (PTR multiconnector, 3-fold)
4 sensor connectors RJ45 for optional sensors (temperature, humidity and air pressure)
Ethernet connector RJ45 (10/100 Mbit/s)
Additional power supply by Power-over-Ethernet (2111-2)
Technical Details
Powdered steel case, LxHxD: 139 x 91 x 35 mm
Comfortable DIN rail mounting by optional mounting clip
Weight: ca. 440 g
Operating temperature: 0-50 °C
Storage temperature: -20 - 70 °C
Relative humidity: 0 - 95 % (non-condensing environment)
Order code
2111-1
2111-2 (PoE integrated)
Scope of delivery
Expert Net Control 2111-1 / 2111-2
Power Supply Unit 7903
Quick start guide
Description File name Version Date Size Changes to previous version/Comments
Manual manual-enc2111-2191.pdf 1.1.4 05/04/2019 3.05 MB

User manual

Download
Product Brief gude-product-brief-enc2111-2191-series.pdf 04/04/2019 844.85 KB

Short product description

Download
Quick Start Guide schnellstart_quickstart_ip-devices.pdf 1.3 04/04/2019 603.66 KB

Quick start guide (leaflet)

Download
Declaration ce-declaration_enc2111-series_12-06-2017.pdf 12/06/2017 65.29 KB

CE declaration of conformity

Download
Firmware firmware-enc2111_v1.1.0.bin 1.1.0 21/03/2018 516.87 KB

Latest firmware - can be installed via webinterface of device

Revision history

MIB Table corresponding to firmware

Download
System Tool gblconf_v2.7.11.exe 2.7.11 11/09/2017 793.35 KB

Windows-Tool for firmware updates and network configuration

Download
System Tool gblc_v0.7.7.tar.gz 0.7.7 07/05/2013 130.53 KB

Linux-Tool for firmware updates and network configuration

Download