4-fold switched and metered PDU

Expert Power Control 1202 for more operational security and energy efficiency in 19-inch installations
  • Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
  • Detect AV and IT problems at an early stage: Proactive power and environment monitoring
  • Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices
  • Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT
  • Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs
Massive time and cost savings through plug-and-play drivers from our technology partners
  • q sys logo gude systems

1202-1: 4x safety socket type F (DE)        1202-3: 4x safety socket type J (CH)

Key Features
  • Event and schedule controlled switching
  • Precise current metering of up to 9 units
  • 1 sensor connector for plug-&-play sensor
  • Fast and easy installation
  • NTP function can be activated
  • Integrated overvoltage protection type 3
Switching function
  • Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH, MQTT and serial interface
  • Programmable on/off sequences for remote reboots (Remote Reboot)
  • Power ports can be switched when preset sensor thresholds are exceeded
  • Self-healing function thanks to 4-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
  • Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
  • Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second

Go to demo webserver      Go to product brief

Metering function
  • Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
  • Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • 1 connectors for combined plug-and-play sensors (temperature and humidity pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure
Security
  • Integrated type 3 overvoltage protection prevents damage to the device and connected loads
  • Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
  • Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
  • Encrypted e-mails (SSL, STARTTLS)
  • Access protection by IP access control
  • Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
  • Password protected access
  • Beeper for audible alarm when sensor limits are exceeded/deceeded
  • EC-Lock power ports prevent accidental unplugging of power cables (for EPC 1202-4)
Operation
  • Easy-to-read LED display for displaying total current, IP address and sensor values
  • Firmware update via Ethernet during operation (no restart required)
  • Simple and flexible configuration via web browser, Windows or Linux program
  • Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
  • Rapid commissioning thanks to free and reliable drivers from our technology partners

Buy product

Description

The Expert Power Control 1202 is a network-ready power distribution unit with 4 switchable power ports. The connected loads can be switched on or off as required and the total power consumption can be monitored, making the PDU a must-have in AV and IT installations, as well as small data centers.

The PDU has two integrated energy counters, whereas one counter is resettable. The metering of a wide range of electrical variables enables the user to identify and exploit power-saving potential in the IT environment for every connected individual load. The power ports can be switched separately via a web interface, via the serial interface, via SNMP or via the button on the device. SNMPv3, SSL and IPv6 as well as Telnet, Radius and Modbus TCP are supported.

Get in touch.