Good. Great. GUDE.
Remote Reboot
A remote reboot means a restart (reboot) of an electronic device, such as a PC, server, switch, router or media control system, remotely via a network. This reboot is a cold start which means that the electronic device is switched off and on by interrupting the power supply. This is also called power cycling.
A reboot can be useful if there is a system fault: For example, a running program has crashed, a system is blocked or an operating system has hung up. By rebooting, these causes of error and thus the system failure can be eliminated.
It is especially helpful for IT managers when a remote reboot is combined with an automatic monitoring function: A so-called watchdog monitors the availability of the device and immediately initiates a reboot in case of malfunctions. With this self-healing function, the user benefits from shorter downtimes and lower operating costs.
| | | | | | | | | |
| | | | | Advantages of a remote reboot | | | | |
| | | | | - Shorter downtime of an IT and AV environment
- Faster response time to correct errors
- Through watchdogs fully automatic possible
- No expensive intervention on site necessary
- No time-consuming calls to support hotlines
- Saving of service technician costs
- No travel costs
| | |  | |
| | | | | | | | | |
| | | | | |
Switched PDUs for Remote Reboot:
Expert Power Control 1202 Series |
Type of PDU |
switched & metered |
Output |
4 x Schuko/IEC C13 |
Input |
1 x Schuko/IEC C20 |
Metering electr. dimensions |
yes, 2 energy meter |
Metering total current |
yes |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 1 sensor port |
|
|
Expert Power Control 1292 Series |
Type of PDU |
switched & metered |
Output |
4 x Schuko/IEC C13 |
Input |
1 x Schuko/IEC C20 |
Control over GSM possible |
yes |
Metering electr. dimensions |
yes, 2 energy meter |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 1 sensor port |
Expert Power Control 8291-1 |
Type of PDU |
switch/meter.AC/DC |
Output |
4x AC,17x DC |
Input |
IEC C20 (16 A) |
Metering current |
Unit metered |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8031 |
Type of PDU |
switched & metered |
Output |
8x IEC C13/Schuko |
Input |
IEC C20 (16 A) |
Metering current |
Unit metered |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8032 |
Type of PDU |
switched & metered |
Output |
8x IEC C13/Schuko |
Input |
IEC C20 (16 A) |
Control via GSM |
yes |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8041 |
Type of PDU |
switched & metered |
Output |
12x IEC C13/Lock |
Input |
IEC C20 (16 A) |
Metering current |
Unit metered |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8042 |
Type of PDU |
switched & metered |
Output |
12x IEC C13/Lock |
Input |
IEC C20 (16 A) |
Control via GSM |
yes |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8035 |
Type of PDU |
switched & metered |
Output |
8x IEC C13 (Lock) |
Input |
IEC C20 (16 A) |
Metering current |
Unit-/port-metered |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|
Expert Power Control 8045 |
Type of PDU |
switched & metered |
Output |
12x IEC C13 (Lock) |
Input |
IEC C20 (16 A) |
Metering current |
Unit/outlet metered |
Residual current monitor |
Type A |
Security |
IPv6, SSL, SNMPv3 |
Environment monitoring |
by 2 sensor ports |
|
|